The FDA issued a draft guidance document on ‘Applying Human Factors and Usability Engineering to Medical Devices to Optimize Safety & Effectiveness in Design’ for Industry and FDA Staff as of June 22, 2011. A 90 day comment period is open and comments to be considered should be sent to FDA by September 19, 2011 per the Federal Register Notice.
In the Federal Register Notice the background information (the first few paragraphs of Section 3 [Overview] of the Guidance document) is interesting as follows:
“To understand use-related hazards, it is necessary to have an accurate and complete understanding of how a device will be used. Understanding and optimizing how people interact with technology is the subject of human factors engineering (HFE) and usability engineering (UE). HFE/UE considerations that are important to the development of medical devices include three major components of the device-user system: (1) Device users, (2) device use environments, and (3) device user interfaces. This interaction and its possible results are depicted graphically in Figure 1.
For safety-critical technologies such as medical devices, the process of eliminating or reducing design-related use problems that contribute to or cause unsafe or ineffective medical treatment is part of a process for controlling overall risk. For devices where harm could result from “use errors,” the dynamics of user interaction are safety-related and should be components of risk analysis and risk management. By incorporating these considerations into the device development process, manufacturers can reduce the overall risk level posed by their devices, thus decreasing adverse events associated with the device, and avoid potential device recalls.
…”
To submit comments follow these instructions: Submit written requests for single copies of the draft guidance document entitled “Draft Guidance for Industry and Food and Drug Administration Staff: Applying Human Factors and Usability Engineering to Optimize Medical Device Design” to the Division of Small Manufacturers, International, and Consumer Assistance, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, rm. 4613, Silver Spring, MD 20993-0002. Send one self-addressed adhesive label to assist that office in processing your request, or fax your request to 301-847-8149. See the SUPPLEMENTARY INFORMATION section for information on electronic access to the guidance.
Submit electronic comments on the draft guidance to http://www.regulations.gov. Submit written comments to the Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, rm. 1061, Rockville, MD 20852. Identify comments with the docket number found in brackets in the heading of this document.