Notified Bodies – Eisner Safety Consultants

Medical Device Compliance & Certification Summit – Why It Matters?

leoeisner — Tue, 23 Dec 2025 23:30:37 +0000

Medical Device Compliance & Certification Summit – Why It Matters?

Medical device and diagnostic compliance expectations are shifting earlier in the product lifecycle. IEC 60601 and related standards are no longer something teams can “handle at test.” Regulators increasingly expect standards interpretation, risk decisions, and test strategy to be visible and justified during design reviews and technical documentation development.

This shift is showing up in real ways – deeper design reviews, tougher pre-submission questions, and increased scrutiny of how standards were applied, not just whether a final test report exists.

To address this reality, Eisner Safety Consultants (ESC) is working with Nemko to deliver a three-day, in-person Medical Device Compliance & Certification Summit focused on how standards, testing, and regulator expectations intersect in real programs.

A focused, three-day program for engineering, regulatory, and compliance teams navigating IEC 60601, IEC 61010, EMC and RF requirements, certification strategy, and regulator guidance documents across FDA, EU, and other markets.

In-Person Training & Live Workshops

February 2–4, 2026
Carlsbad Inn Beach Resort, 3075 Carlsbad Blvd, Carlsbad, CA 92008

Designed for teams preparing new medical devices or diagnostics for market, working through recurring EMC or RF failures, or tightening FDA or EU MDR technical documentation ahead of submission or surveillance review.

Registration Summit Details

Who this summit is designed for

Electrical, EMC, RF, and systems engineers
Regulatory affairs and quality professionals
Product and compliance managers
Medical device and diagnostic startups preparing first submissions
Teams facing test failures, redesigns, or certification delays

What attendees will learn

How regulators evaluate standards application, not just test outcomes
Future impacts of IEC 60601-1, 4th edition concepts on design controls
Essential Performance and its role in risk management and review discussions
How EMC and RF strategies influence certification timelines
When IEC 61010 applies to diagnostic and laboratory equipment
Cybersecurity expectations under FDA and EU MDR
How guidance documents shape FDA and EU technical file expectations

How Eisner Safety Consultants Can Help

As regulatory expectations increase, delays are often caused by unclear standards interpretation, weak traceability between design decisions and requirements, and technical documentation that does not explain why choices were made.

Eisner Safety Consultants works with medical device, diagnostics, and combination device manufacturers every day to translate IEC 60601, IEC 61010, and related standards into practical design inputs, defensible test strategies, and documentation that aligns with FDA, EU, and other regulator guidance documents.

Registration Summit Details

From Engineer To “The IEC 60601 Guy” – Project MedTech Podcast

leoeisner — Sun, 19 Oct 2025 00:04:30 +0000

Podcast Feature

From engineer to “The IEC 60601 Guy” — my story and practical tips

I joined Duane Mancini on the Project Medtech Podcast to share how I became known for IEC 60601, why the series is a roadmap you can follow, and what 4th Edition changes mean for design, QMS, and documentation.

Episode 235

Listen on Web Open Spotify

A quick personal note

Nobody starts at the top as “The IEC 60601 Guy.” My path ran through early days at NASA, many years in test labs, and deep work in standards committees. What stuck with me is simple — stay curious, do the work, and show the work. That’s how we turn a dense standard into a practical plan.

Key takeaways from the episode

On the Project Medtech Podcast with Duane Mancini, M. Sc., I shared my genesis story of how I became known as The “IEC 60601 Guy”. Duane asked me to give listeners a 101 course on the IEC 60601 series, and I explained how I strive to “de-Greek” or demystify the standard series, and gave a preview of the big shifts coming in 4th Edition.

The “big picture” structure of the general standard, collateral standards, and particular standards

How lifecycle standards (risk management, usability, software) compare to type test standards in the 60601 family

Tangible changes to watch in the upcoming 4th Edition: clearer alarm requirements and impacts on design, QMS, & documentation

Why leaning on experts (internal or external) is key to getting this right for the impacts of 4th Edition

My goal is to “de-Greek” the process and show that IEC 60601 can be a roadmap , not a riddle

Whether you’re new to standards or a seasoned MedTech veteran, this episode shows how to approach IEC 60601 as a roadmap you can follow, instead of a riddle you can never quite solve.

What peers said

“If you want to know more about IEC 60601, Leo is the resource to go to … I recommend this episode to everybody working with medical electrical equipment.”

— Beat Keller

“Great to see how you became such an expert … I hope your story inspires young professionals to invest in becoming experts themselves.”

— Ronald Boumans

“It’s amazing that you covered the difference between process and test standards — there’s still a lot of confusion out there.”

— Tibor Zechmeister

Continue the discussion on this topic on LinkedIn

How We Can Help

If your team needs help with the IEC 60601 Series, or mapping the 4th Edition into your design controls, QMS, labeling, or testing strategy, my team at Eisner Safety Consultants and I are ready to support you.

Schedule a call with me, Leo, the IEC 601 Guy

Major changes to IEC 60601-1 are closer than you think

leoeisner — Fri, 15 Aug 2025 18:53:33 +0000

Once the 4th Edition is published, redesigns and QMS updates will be far more costly.

Direct insights from someone in the development of IEC 60601-1, 4th Edition

Get an insider’s view of the upcoming changes, their real-world impact, and how to prepare, from someone directly involved in developing the standard.

Event Recap – MLVx Friday In-Focus

On Friday, August 15, the MLVx Friday In-Focus with Sean Smith brought together Leonard (Leo) Eisner, The IEC 60601 Guy, and 110+ professionals from around the globe, including the UK, Romania, US, France, Switzerland, Germany, Finland, and Pakistan, representing medtech manufacturers, regulators, test houses, and standards developers.

We focused on the impact of IEC 60601-1, 4th Edition, the global standard that defines safety and essential performance for medical electrical equipment, and what’s coming that many companies are still not prepared for.

The highlight was an impromptu expert panel with leaders in risk management, software, cybersecurity, regulatory submissions, and combination devices. Together, we tackled questions from every angle, sharing real-world insights on design, testing, and compliance challenges. The discussion showed exactly what’s possible when top experts collaborate to help the industry prepare for disruptive change.

(Full presentation available for download at the bottom of this post.)

Unlock Your IEC 60601-1 Insider Advantage

Mitigate Risks: Spot disruptive changes early, prevent costly redesigns, and align documentation ahead of competitors
Accelerated Compliance: Seamlessly integrate evolving requirements into your development pipeline
Leadership Insight: The IEC 60601 Guy and our expert team track areas of interest for your organization based on draft documents
Behind Closed Doors: Access knowledge while it’s still being developed
Ready to Leap Ahead? Let’s turn this insider pipeline into your 4th Edition fast-track

+1-503-709-8328
EisnerSafety.com
Schedule a Free 30-Minute Web Meeting

If you missed the live session, this recap and presentation will help you understand what’s coming — and more importantly, how to prepare.

MLVx Impact of IEC 60601-1 4th Ed FINAL Vers 2025-08-15 compressed for website Download

Join me for an Interactive Workshop Identifying Standards, Guidances, & Turn Standards into Your Competitive Advantage @ 10X

leoeisner — Mon, 31 Mar 2025 22:50:00 +0000

Join me, Leo Eisner, The IEC 60601 Guy, as I lead an interactive and fun workshop at the 10X Medical Device Conference in Newport Beach, Ca on May 7 – 8, 2025. Turn Medical Device Standards into Your Competitive Advantage, and discover practical strategies to leverage standards, avoid costly errors, and accelerate your product development cycle.

Don’t make the 5 costly mistakes companies make with Medical Device Standards. Learn from the IEC 60601 Guy himself.:

Late Identification of Applicable Standards: Leads to expensive redesigns and delayed timelines
Ignoring Expert Standards Guidance: Results in regulatory rejections and costly resubmissions
Unprepared Risk Management File for Testing: Risks unnecessary costs due to lack of strategic planning for compliance.
Unprepared Regulatory Submissions: Leads to costly setbacks and market-entry delays
Underestimating Education and Training: Creates knowledge gaps, increasing errors and compliance risks.

I want to thank Sean Smith and his team from 10X for all his help and dedication for putting on this event. He is doing an amazing job and please contact him if you are interested.

Need help with standards?

We provide support for your design and development process for regulatory submissions.? Eisner Safety Consultants can help by

Assisting with strategic compliance planning for your medical electrical product lines,
Providing regulatory support when FDA or a regulator asks technical questions on your submission.
Identification of applicable standards, laws, regulations, guidances, and directives up front to support your design process effectively.
Design Documentation Reviews providing expert analysis supporting the design development process to avoid unnecessary design and development delays.
We provide EU, US, and other countries regulatory requirement reviews of standards, laws, directives, and guidance.
Providing support with Swiss MedDO, EU MDR, clinical evaluation assessment, NB remediation, STEDs, and more.
Interfacing with test houses for medical safety, EMC and arrange other testing.

Feel free to schedule a web meeting with Leo or contact us.

ISO 20417, 2nd DIS Breaking News from Tokyo Meeting 📣📣

leoeisner — Tue, 25 Mar 2025 20:38:12 +0000

ISO TC 210 WG2 met in Tokyo, Japan on 4 – 5 March 2025.

WG2 meeting focused primarily on resolving the National Committees (NCs) comments received on the ISO/DIS 20417, 2^nd ed.

Thx to the hard work of our fearless Project Leader, doing a huge amount of prep work just prior to the WG meeting.
WG was able to review and resolve all the comments.
Next step will be to circulate for FDIS ballot ISO/FDIS 20417, 2^nd ed., that the NCs will vote on.

Changes proposed:

Add reference to transport and storage symbols for environmental conditions for packaging to distinguish between transport and storage environmental conditions.

Updated sub-cl 6.5.3 a) new sub items 2) & 3) with symbols for transport and storage – Special Section not included in LinkedIn Post
These symbols for transport is Symbol 3869 from ISO 14617-14:2004 (link goes to the ISO online browsing platform) and for storage is Symbol 2066 from ISO 14617-7:2002
This has been something I have been developing for more than a year with TC 210/ WG3 and also IEC 60601-1, 4^th ed., IEC TC 62/SC 62A/WG38 with a small team. At the Tokyo meeting TC210 / WG3 we have set up a task team to look at the proposed symbols for transport, storage and operation (operation was not included in ISO 20417 as no comment was provided). WG3 task team has not met yet so unable to share the proposed symbols from WG3 perspective at this time.

IEC TC 62/SC 62A/WG38, Fragment 2, (IEC 60601-1, 4th ed. – learn more about it) 62A/1630/CD was issued Dec 6 2024 and was closed for comments on Feb 28 2025. We are meeting in Arlington, Virginia at the AAMI offices to work on the comments March 30 – April 4, 2025. The two symbols above are part of the symbols that are in the CD and there are additional ones including one for operating IEC 60417‑6090:2012 and transient IEC 60417-5184:2002 environmental conditions, and indoor use IEC 60417-5957:2004. Some combination of the environmental conditions such as temperature, humdity, and atmospheric pressure will need to be combined as applicable to operation, storage and transport. Trainsient is a special condition. Please refer to the CD to understand the usage of the symbols.

Deleted 6.1.2 d) 1) (Change from “EC Rep” to “XX Rep”)

Align with update of ISO 15223-1:2021/A1:2025 published March 3, 2025 with “EC Rep” changed to “XX Rep” (5.1.2).
6.1.2 d) 1) previously stated: “When using symbol 5.1.2 from ISO 15223-1:—, the ‘EC’ may be replaced by the 2-letter or 3-letter country code given in ISO 3166-1.”

Added concept of “applicable policy”

New 3.3 definition.
Aligns with 1/2634/CDV of IEC 60050-880, 1^st ed, term 880-17-02) & about 20 additions in the normative text to “applicable policy” making those requirements based on what the authority having jurisdiction requires so more flexible.

Changed from “production control” to “production control identifier”

Make clearer the definitions of lot number, lot code, batch code, batch number, serial number, & other options noted in 5.9 of ISO 20417, 1^st ed. (will be 5.8 ISO 20417, 2^nd ed.)

The requirements related to commercial product name were deleted as they were duplicative of the catalogue number requirements.

Deleted 4 b)

The previous 4 b) roughly says: Normatively referenced edition of a standard in ISO 20417, ed., the manufacturer may substitute with a more current version provided by the manufacturer provided they can demonstrate the residual risk remains acceptable and is comparable to the residual risk that results from applying the normatively referenced document.
The normative referenced standards in the new draft FDIS are undated or dated. Undated references are required to be the most recent copy of the standard and the dated ones are required to be the dated version. ISO 15223-1 is the only dated normative referenced standard and references ISO 15223-1:2021 and ISO 15223-1:2021/AMD 1:2025 (ISO format requirements) in the draft FDIS.

HAS Consultant comments received late, added to collated comments, and resolved. JTC3 will prepare updated Annex Zs for addition to the FDIS

updated the normative references

Informative referenced standards (“should ” or “see standards” statement) were moved to the bibliography
Dropped ISO 16142-1 & -2 standards as both were withdrawn

Delete former informative Annexes D, F, G and H;

Annex D – Cross reference between the document and the requirements considered
Annex F – Reference to the essential principles (ISO 16142-1:2016 & ISO 16142-2:2017 – both withdrawn)
Annex G – Reference to the general safety and performance requirements for medical devices (Was previous corresponding list of GSPRs to the EU MDR list but will be replaced by Annex ZA^#)
Annex H – Reference to the general safety and performance requirements for IVD medical devices (Was previous corresponding list of GSPRs to the EU IVDR list but will be replaced by Annex ZB^#)
^# Annex ZA & ZB The FDIS will include Annex ZA & ZB prepared by JTC3 but not the final ISO publication.

Need Help?

Need help with 60601 series standards including EMC? Eisner Safety Consultants can assist with strategic compliance planning for your medical electrical product lines, provide support when FDA or a regulator asks questions for a submission. We deal with EU, US, and other country regulatory requirements, standards, laws, directives, and guidances. Our team also provides support with Swiss MedDO, EU MDR, clinical evaluation assessment, NB remediation, STEDs, and more. We work with many test labs for medical safety, EMC and can arrange other testing, as well. Feel free to schedule a web meeting with Leo or contact us.

MedTech Leading Voice 100 2025 Yearbook – Great Resource Tool!!

leoeisner — Sat, 25 Jan 2025 08:57:17 +0000

This is an amazing resource that MedTech Leading Voice has put together and is free to download.

‘This isn’t a “best of” list – it’s a guide to people worth following …

It’s a guide to 100 individuals worth following on LinkedIn—people who are sharing unique insights, actionable advice, and thought-provoking content.’ – Sean Smith, MedTech Leading Voice

So, what now?
Browse through to find leaders you want to follow – lots of different categories and interests
Explore their insights
Share your favorites in Leo Eisner’s LinkedIn Post comments for the MLV100

Now for my story of how I made it onto the MLV100 Yearbook list – Thank you Sean, Mike and many others in the MedTech community

My credo: “I like to support my clients and the MedTech industry in understanding standards, regulations, laws, and guidance. This is one of our cornerstones to support our clients from the beginning of the design and development process.”

My journey began, straight out of college, in 1985 at Underwriters Laboratories, where I gained experience in various product and component test standards, including UL and NFPA.

I joined TÜV SÜD in 1994, starting my medical career. I worked with medical electrical standards UL 601-1, UL 544, and IEC 60601-1, 2nd ed. and became an MDD auditor.

Moved into an industry role for a couple years and then decided to start up my consulting company in 1998 full time.

I have been fortunate to be involved in standards development over the past 20+ years to benefit my clients and industry. This helps me stay updated and assist my clients in product design and development.

My focus has been IEC 60601-1. I am one of the conveners for the 4th ed. of IEC 60601-1 which is under development currently. But I am also involved in a lot more standards than just IEC 60601-1. Check out my LinkedIn profile.

I have always been happy to share my knowledge via blog posts, articles, webinars, and podcasts.

It’s an honor to be included with this amazing listing of MedTech experts, Regulators, entrepreneurs, and influencers.

Thank you, Sean and MedTech Leading Voice, for including me on this impressive and very unique list. You’ve built a collaborative community that enhances skills and knowledge in the MedTech community!

Need Help?

The most valuable asset we each bring to the table is⁉️ Our unique experiences and innovation

leoeisner — Mon, 30 Sep 2024 06:46:00 +0000

Leo Eisner, The60601Guy will be visiting London in October. You have the chance to sit down with me, The60601Guy, have a cup a coffee or a beer and talk IEC60601, design for compliance, and standards that apply to your device. I have time slots open on 7, 8, and 11 of Oct. Or join me for a dinner on the 8 or 11 Oct.

Meet me in London – I want to hear from you the week of 7 Oct. These two hour slots are limited before they are gone, 𝗯𝗼𝗼𝗸 𝗻𝗼𝘄 𝗼𝗻 𝗺𝘆 𝘀𝗽𝗲𝗰𝗶𝗮𝗹 𝗰𝗮𝗹𝗲𝗻𝗱𝗮𝗿 for 𝗺𝘆 𝗟𝗼𝗻𝗱𝗼𝗻 𝘃𝗶𝘀𝗶𝘁. I’d love to chat!

Let’s connect, and explore how we can support your company with our international team of compliance & regulatory experts from Eisner Safety Consultants. I’m eager to learn what you’re working on and how you’re driving change and innovation in the industry, and how we can support you to get you to market faster.

Let’s meet up! 𝗕𝗼𝗼𝗸 𝘁𝗶𝗺𝗲 𝗼𝗻 𝗺𝘆 𝘀𝗽𝗲𝗰𝗶𝗮𝗹 𝗰𝗮𝗹𝗲𝗻𝗱𝗮𝗿 for 𝗺𝘆 𝗟𝗼𝗻𝗱𝗼𝗻 𝘃𝗶𝘀𝗶𝘁.

How to ID Applicable Standards – Combinate Podcast

leoeisner — Wed, 07 Aug 2024 21:08:23 +0000

Join me, Leonard (Leo) Eisner, the “IEC 60601 Guy”,

in a conversation with Subhi Saadeh of Combinate Podcast

as we look at how to assess applicable standards for medical and combination devices and a few highlights on IEC 60601-1, 4th ed. in Combinate Podcast 148 https://bit.ly/LIPostCombinatePodcast148LeoEisner

He really does his research and is a great interviewer. I always find it fun and intriguing to have a conversation with Subhi as I too learn from our conversations.

We discuss:
☞ complexities in assessing applicable standards
☞ understanding the impact of product environment, intended use, & applicable markets
☞ challenges and strategies for documenting standards assessments
☞ leveraging existing standards to avoid unnecessary development
☞ tips for small and large companies
☞ significance of early research
☞ essential stakeholders involved in standards assessment
☞ and more….

Join us in the conversation on LinkedIn and leave your comments so we can continue this discussion.

Need help with 60601 series standards (Medical Electrical Equipment) including EMC; strategic compliance planning for your medical electrical product lines; need support when FDA or a regulator asks questions for a submission Eisner Safety Consultants experts deal with EU, US, & other country regulatory requirements & standards, laws, directives, and more. Leo Eisner is an expert on standards development and sits on many standards committees. He also has experts on additional standards committees and we all talk to the regulators. He has a team of experts to support your needs.

We work with many test labs for Medical Safety & EMC and can arrange other testing, as well. Please let us know if we can help when you contact us.

Feel free to schedule a call with Leo or contact Leo at Leo@EisnerSafety.com or through our contact form.

Welcome 3 Global Experts to the Eisner Safety Consultants Team

leoeisner — Sun, 30 Jun 2024 23:53:51 +0000

We are thrilled to announce three incredibly talented individuals joining the Eisner Safety Consultants Team to support your needs.

Beat Keller’s expertise comprises the IEC 60601 series, software, and regulatory/quality. In the regulatory/quality area, he focuses on EU MDR, Swiss MedDO, and UK MDR.

Lisa Donlon’s expertise encompasses device regulatory/submissions and quality. Her focus is on EU MDR, clinical Evaluation Assessment, and NB Remediation.

Dan Modi’s expertise spans the IEC 60601 Series, EMC, design quality, device submissions/regulatory – EU MDR, U.S., India, China, Brazil, Japan, and more.

We have strengthened our team to support your needs so please feel free to schedule a meeting to discuss your needs or contact us.

What’s The Relationship of Updated IMDRF N47 & N52 to IEC 60601-1, 4th ed?

leoeisner — Thu, 16 May 2024 01:22:22 +0000

𝗕𝗥𝗘𝗔𝗞𝗜𝗡𝗚 𝗡𝗘𝗪𝗦 𝗜𝗠𝗗𝗥𝗙 𝗡𝟰𝟳 & 𝗡𝟱𝟮 recently updated to 𝗘𝗱𝗶𝘁𝗶𝗼𝗻 𝟮 – 𝗪𝗵𝗮𝘁’𝘀 𝘁𝗵𝗲 𝗿𝗲𝗹𝗮𝘁𝗶𝗼𝗻𝘀𝗵𝗶𝗽 𝘁𝗼 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭-𝟭, 𝟰𝘁𝗵 𝗲𝗱

IMDRF N47 & N52 both have been updated which will support Regulatory Submissions and Compliance Testing for the future of the IEC 60601 series including IEC 60601-1, 4^th edition. 𝗜𝗠𝗗𝗥𝗙 𝗽𝘂𝗯𝗹𝗶𝘀𝗵𝗲𝗱 two Final documents on 𝟮𝟲 𝗔𝗽𝗿𝗶𝗹 𝟮𝟬𝟮𝟰, both to Version 2:
N47 Essential Principles of Safety and Performance of Medical Devices & IVD Medical Devices, and
N52 Principles of Labeling for Medical Devices and IVD Medical Devices

The 𝗽𝘂𝗿𝗽𝗼𝘀𝗲 𝗼𝗳 𝗡𝟰𝟳 𝗴𝘂𝗶𝗱𝗮𝗻𝗰𝗲 is to provide harmonized Essential Principles that should be fulfilled in the design & manufacturing of medical devices and in vitro diagnostic (IVD) medical devices to ensure that they are safe and perform as intended. The worldwide adoption of a common set of fundamental design and manufacturing requirements for medical devices that, when met, provide assurance the device is safe and performs as intended, offers significant benefits to, among others, manufacturers, users, patients/consumers, and to Regulatory Authorities. Reducing differences between jurisdictions decreases the cost of gaining regulatory compliance and allows patients earlier access to new technologies and treatments.

While 𝗡𝟱𝟮 𝗹𝗲𝘃𝗲𝗿𝗮𝗴𝗲𝘀 𝗼𝗻 𝗡𝟰𝟳 𝗮𝘀 𝗶𝘁’𝘀 𝗽𝘂𝗿𝗽𝗼𝘀𝗲 states this guidance is to provide globally harmonized labeling principles for medical devices, including in vitro diagnostic (IVD) medical devices, and support N47. Specifically, this document provides guidance on the content of the label, instructions for use, and information intended for the patient in order to support the safe and effective use of medical devices and IVD medical devices by their intended users.

With the 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭-𝟭, 𝟰𝘁𝗵 𝗲𝗱𝗶𝘁𝗶𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁 underway 𝗼𝗻𝗲 𝗼𝗳 𝘁𝗵𝗲 𝗗𝗲𝘀𝗶𝗴𝗻 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀 – 𝗚𝗼𝗮𝗹 𝟲 of the 𝗔𝗿𝗰𝗵𝗶𝘁𝗲𝗰𝘁𝘂𝗿𝗲 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻:

“Establish a policy relating requirements of the IEC 60601 series to the IMDRF essential principles and labelling principles.”
𝗚𝗼𝗮𝗹 𝟲 𝗶𝘀 𝗱𝗶𝗿𝗲𝗰𝘁𝗹𝘆 𝗿𝗲𝗹𝗮𝘁𝗲𝗱 𝘁𝗼 𝘁𝗵𝗲 𝗜𝗠𝗗𝗥𝗙 𝗱𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝘀 𝗡𝟰𝟳 𝗮𝗻𝗱 𝗡𝟱𝟮 𝘄𝗵𝗶𝗰𝗵 𝘄𝗲𝗿𝗲 𝗿𝗲𝗰𝗲𝗻𝘁𝗹𝘆 𝘂𝗽𝗱𝗮𝘁𝗲𝗱 𝘁𝗼 𝗘𝗱𝗶𝘁𝗶𝗼𝗻 𝟮.

The Architecture Spec states:

“It is the 𝗽𝗼𝗹𝗶𝗰𝘆 𝗼𝗳 𝗜𝗘𝗖/𝗧𝗖 𝟲𝟮 𝘁𝗼 𝗶𝗻𝗰𝗹𝘂𝗱𝗲 𝗮𝗻 𝗶𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝘃𝗲 𝗮𝗻𝗻𝗲𝘅 𝗺𝗮𝗽𝗽𝗶𝗻𝗴 the 𝗿𝗲𝗹𝗮𝘁𝗶𝗼𝗻𝘀𝗵𝗶𝗽 𝘁𝗼 𝘁𝗵𝗲 𝗜𝗠𝗗𝗥𝗙 𝗘𝗦𝗦𝗘𝗡𝗧𝗜𝗔𝗟 𝗣𝗥𝗜𝗡𝗖𝗜𝗣𝗟𝗘𝗦 𝗮𝗻𝗱 𝗟𝗔𝗕𝗘𝗟𝗟𝗜𝗡𝗚 𝗣𝗥𝗜𝗡𝗖𝗜𝗣𝗟𝗘𝗦 in 𝗲𝗮𝗰𝗵 𝗼𝗳 𝘁𝗵𝗲 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱𝘀 𝗼𝗳 𝘁𝗵𝗲 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭 𝗦𝗘𝗥𝗜𝗘𝗦.”
This is a goal of IEC/TC 62. For the IEC 60601-1, 4^th edition project all Working Groups (WG’s) are tasked to do this work in their WG’s. There are 12 WG’s split up by hazards. In the future all standards that are developed by IEC/TC 62 should also follow this goal.
Another part of Goal 6 from the Architecture Spec states:
“The 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀 𝗶𝗻 𝗺𝗮𝗻𝘆 𝗼𝗳 𝘁𝗵𝗲 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱𝘀 𝗶𝗻 𝘁𝗵𝗲 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭 𝗦𝗘𝗥𝗜𝗘𝗦 are 𝗶𝗻𝘁𝗲𝗻𝗱𝗲𝗱 𝘁𝗼 𝗳𝘂𝗹𝗳𝗶𝗹 𝘀𝗼𝗺𝗲 𝗼𝗳 𝘁𝗵𝗲 𝗽𝗿𝗶𝗻𝗰𝗶𝗽𝗹𝗲𝘀 set out 𝗶𝗻 𝘁𝗵𝗲 𝗜𝗠𝗗𝗥𝗙 𝗴𝘂𝗶𝗱𝗮𝗻𝗰𝗲 𝗱𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝘀. To facilitate the usage of the documents in the IEC 60601 SERIES for conformity assessment purposes by the AUTHORITIES HAVING JURISDICTION, it is important to 𝗰𝗹𝗲𝗮𝗿𝗹𝘆 𝗶𝗻𝗱𝗶𝗰𝗮𝘁𝗲 𝘄𝗵𝗶𝗰𝗵 𝗜𝗠𝗗𝗥𝗙 𝗽𝗿𝗶𝗻𝗰𝗶𝗽𝗹𝗲𝘀 𝗮𝗿𝗲 𝗰𝗼𝘃𝗲𝗿𝗲𝗱 𝗯𝘆 𝘄𝗵𝗶𝗰𝗵 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀 𝗶𝗻 𝗮 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱 𝗶𝗻 𝘁𝗵𝗲 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭 𝗦𝗘𝗥𝗜𝗘𝗦.”
This 𝗚𝗼𝗮𝗹 𝟲 𝘀𝘂𝗽𝗽𝗼𝗿𝘁𝘀 𝘁𝗵𝗲 𝗜𝗠𝗗𝗥𝗙’𝘀 𝗰𝗼𝗻𝗰𝗲𝗽𝘁 𝗼𝗳 𝗲𝗹𝗶𝗺𝗶𝗻𝗮𝘁𝗶𝗻𝗴 𝗱𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝗰𝗲𝘀 𝗯𝗲𝘁𝘄𝗲𝗲𝗻 𝗷𝘂𝗿𝗶𝘀𝗱𝗶𝗰𝘁𝗶𝗼𝗻𝘀 which 𝗱𝗲𝗰𝗿𝗲𝗮𝘀𝗲𝘀 𝘁𝗵𝗲 𝗰𝗼𝘀𝘁 𝗼𝗳 𝗴𝗮𝗶𝗻𝗶𝗻𝗴 𝗿𝗲𝗴𝘂𝗹𝗮𝘁𝗼𝗿𝘆 𝗰𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝗰𝗲 from the various AUTHORITIES HAVING JURISDICTION (AHJ) and allows 𝗽𝗮𝘁𝗶𝗲𝗻𝘁𝘀 𝗲𝗮𝗿𝗹𝗶𝗲𝗿 𝗮𝗰𝗰𝗲𝘀𝘀 𝘁𝗼 𝗻𝗲𝘄 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝗶𝗲𝘀 𝗮𝗻𝗱 𝘁𝗿𝗲𝗮𝘁𝗺𝗲𝗻𝘁𝘀. This is a positive impact on patients and also makes for an easier process for the manufacturers and for the AHJ’s, as well.

When IEC TC 62/SC 62A/WG 39 met in Arlington, VA on 1- 2 May 2024 this was brought up during the meeting, as this is an important issue that needs to be addressed during the IEC 60601-1, 4^th edition project. One aspect WG 39 is dealing with is “Information to be supplied by the manufacturer” (i.e. Labeling). This is the IEC 60601-1, 4^th edition WG that I am a co-convener of. There are lots of changes happening in the standards and regulatory world around labeling and we are working hard to keep informed on all these changes that will impact this project. 𝗦𝘁𝗮𝘆 𝘁𝘂𝗻𝗲𝗱 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝘂𝗽𝗱𝗮𝘁𝗲𝘀

Need help with 60601 series standards (Medical Electrical Equipment) including EMC; training to 3rd or 4th edition; strategic planning for your medical electrical product lines; need support when FDA or a regulator asks questions for a submission Eisner Safety Consultants experts deal with EU, US, & other country regulatory requirements & standards, laws, directives, and more. Leo Eisner is an expert on standards development and sits on many standards committees. He also has experts on additional standards committees and we all talk to the regulators. He has a team of experts to support your needs.

We work with many test labs for Medical Electrical Safety & EMC and can arrange other testing, as well. Please let us know if we can help when you contact us.

Feel free to schedule a call with Leo or contact Leo at Leo@EisnerSafety.com or through our contact form.