Impacts on IEC 60601-1, 4th Ed. – Webinar Recap and Industry Reactions

Insights from 110+ MedTech professionals on the upcoming 4th Edition and its impact on design controls, QMS, and labeling.

Video Replay Download Slides Schedule a Call

On August 15, 2025, I had the privilege of presenting the Impacts on IEC 60601-1, 4th Edition webinar as part of MLVx Friday In-Focus. The turnout was incredible, with more than 110 MedTech professionals from around the world joining. Startups, SMEs, large manufacturers, test labs, and regulators were all represented.

We unpacked the drivers and major changes in the upcoming 4th Edition, and the discussion didn’t stop when the webinar ended. Some of the most valuable insights came afterward in the LinkedIn conversations that followed.

See the replay post and comments here on LinkedIn
And the prior post: Major changes to IEC 60601-1, 4th Ed. are closer than you think

What the Industry Is Talking About

From the comments and follow-up conversations, four major themes stood out:

• SME vs Large Corp Burden – Smaller companies worry the 4th Edition requirements could hit them harder than large corporations with more resources.
• National & International Committee Involvement – Many are realizing that participating in standards development, even at the national level, gives manufacturers a seat at the table. Being involved internationally is even more powerful if you can swing it.
• Rationale Behind Requirements – The Design Specification requires a rationale for each requirement of the standard. This is not fully addressed in Ed. 3.2, so the change should help improve industry understanding of the standard going forward.
• Impacts on Design Controls, QMS, and Labeling – These changes are not just “paper exercises.” They will reshape how manufacturers approach design controls, QMS integration, and labeling processes across the entire product lifecycle.

Replay Video

If you missed the live session or want to revisit the details, here’s the full webinar replay:

Download the slides here

Why This Matters

As the IEC 601 Guy, I’ve been deeply involved in the development of IEC 60601-1, not just for this edition but also for the previous edition. The 4th Edition is shaping up to be one of the most impactful yet, especially in how it connects to design controls, supplier oversight, and QMS processes.

Conversations like these are important because they highlight the real-world concerns of manufacturers, regulators, and test labs. They help ensure implementation of the standard is proactive, not reactive.

How We Can Help

If your team needs help mapping these 4th Edition changes into your design controls, QMS, or testing strategy, my team at Eisner Safety Consultants and I are here to support you.

Schedule a call with me, Leo, the IEC 601 Guy. My team & I are here to support your needs.

Keep the Conversation Going

Standards only evolve when industry voices are active. I encourage you to:

• Join the LinkedIn conversation: Replay post + comments
• See the earlier discussion thread: Major changes to IEC 60601-1, 4th Ed. are closer than you think
• Explore more insights on my blog: Standards Updates or see my previous Podcasts

Together, we can make sure these changes lead to safer devices, smoother regulatory pathways, and stronger compliance strategies.

Once the 4th Edition is published, redesigns and QMS updates will be far more costly.

Direct insights from someone in the development of IEC 60601-1, 4th Edition

Get an insider’s view of the upcoming changes, their real-world impact, and how to prepare, from someone directly involved in developing the standard.

Event Recap – MLVx Friday In-Focus

On Friday, August 15, the MLVx Friday In-Focus with Sean Smith brought together Leonard (Leo) Eisner, The IEC 60601 Guy, and 110+ professionals from around the globe, including the UK, Romania, US, France, Switzerland, Germany, Finland, and Pakistan, representing medtech manufacturers, regulators, test houses, and standards developers.

We focused on the impact of IEC 60601-1, 4th Edition, the global standard that defines safety and essential performance for medical electrical equipment, and what’s coming that many companies are still not prepared for.

The highlight was an impromptu expert panel with leaders in risk management, software, cybersecurity, regulatory submissions, and combination devices. Together, we tackled questions from every angle, sharing real-world insights on design, testing, and compliance challenges. The discussion showed exactly what’s possible when top experts collaborate to help the industry prepare for disruptive change.

(Full presentation available for download at the bottom of this post.)

Unlock Your IEC 60601-1 Insider Advantage

• Mitigate Risks: Spot disruptive changes early, prevent costly redesigns, and align documentation ahead of competitors
• Accelerated Compliance: Seamlessly integrate evolving requirements into your development pipeline
• Leadership Insight: The IEC 60601 Guy and our expert team track areas of interest for your organization based on draft documents
• Behind Closed Doors: Access knowledge while it’s still being developed
• Ready to Leap Ahead? Let’s turn this insider pipeline into your 4th Edition fast-track

+1-503-709-8328
EisnerSafety.com
Schedule a Free 30-Minute Web Meeting

If you missed the live session, this recap and presentation will help you understand what’s coming — and more importantly, how to prepare.

Join me, Leo Eisner, The IEC 60601 Guy, as I lead an interactive and fun workshop at the 10X Medical Device Conference in Newport Beach, Ca on May 7 – 8, 2025. Turn Medical Device Standards into Your Competitive Advantage, and discover practical strategies to leverage standards, avoid costly errors, and accelerate your product development cycle.

Don’t make the 5 costly mistakes companies make with Medical Device Standards. Learn from the IEC 60601 Guy himself.:

• Late Identification of Applicable Standards: Leads to expensive redesigns and delayed timelines
• Ignoring Expert Standards Guidance: Results in regulatory rejections and costly resubmissions
• Unprepared Risk Management File for Testing: Risks unnecessary costs due to lack of strategic planning for compliance.
• Unprepared Regulatory Submissions: Leads to costly setbacks and market-entry delays
• Underestimating Education and Training: Creates knowledge gaps, increasing errors and compliance risks.

I want to thank Sean Smith and his team from 10X for all his help and dedication for putting on this event. He is doing an amazing job and please contact him if you are interested.

Need help with standards?

We provide support for your design and development process for regulatory submissions.? Eisner Safety Consultants can help by

• Assisting with strategic compliance planning for your medical electrical product lines,
• Providing regulatory support when FDA or a regulator asks technical questions on your submission.
• Identification of applicable standards, laws, regulations, guidances, and directives up front to support your design process effectively.
• Design Documentation Reviews providing expert analysis supporting the design development process to avoid unnecessary design and development delays.
• We provide EU, US, and other countries regulatory requirement reviews of standards, laws, directives, and guidance.
• Providing support with Swiss MedDO, EU MDR, clinical evaluation assessment, NB remediation, STEDs, and more.
• Interfacing with test houses for medical safety, EMC and arrange other testing.

Feel free to schedule a web meeting with Leo or contact us.

ISO TC 210 WG2 met in Tokyo, Japan on 4 – 5 March 2025.

WG2 meeting focused primarily on resolving the National Committees (NCs) comments received on the ISO/DIS 20417, 2^nd ed.

• Thx to the hard work of our fearless Project Leader, doing a huge amount of prep work just prior to the WG meeting.
• WG was able to review and resolve all the comments.
• Next step will be to circulate for FDIS ballot ISO/FDIS 20417, 2^nd ed., that the NCs will vote on.

Changes proposed:

Add reference to transport and storage symbols for environmental conditions for packaging to distinguish between transport and storage environmental conditions.

• Updated sub-cl 6.5.3 a) new sub items 2) & 3) with symbols for transport and storage – Special Section not included in LinkedIn Post
• These symbols for transport is Symbol 3869 from ISO 14617-14:2004 (link goes to the ISO online browsing platform) and for storage is Symbol 2066 from ISO 14617-7:2002
• This has been something I have been developing for more than a year with TC 210/ WG3 and also IEC 60601-1, 4^th ed., IEC TC 62/SC 62A/WG38 with a small team. At the Tokyo meeting TC210 / WG3 we have set up a task team to look at the proposed symbols for transport, storage and operation (operation was not included in ISO 20417 as no comment was provided). WG3 task team has not met yet so unable to share the proposed symbols from WG3 perspective at this time.
  
  IEC TC 62/SC 62A/WG38, Fragment 2, (IEC 60601-1, 4th ed. – learn more about it) 62A/1630/CD was issued Dec 6 2024 and was closed for comments on Feb 28 2025. We are meeting in Arlington, Virginia at the AAMI offices to work on the comments March 30 – April 4, 2025. The two symbols above are part of the symbols that are in the CD and there are additional ones including one for operating IEC 60417‑6090:2012 and transient IEC 60417-5184:2002 environmental conditions, and indoor use IEC 60417-5957:2004. Some combination of the environmental conditions such as temperature, humdity, and atmospheric pressure will need to be combined as applicable to operation, storage and transport. Trainsient is a special condition. Please refer to the CD to understand the usage of the symbols.

Deleted 6.1.2 d) 1) (Change from “EC Rep” to “XX Rep”)

• Align with update of ISO 15223-1:2021/A1:2025 published March 3, 2025 with “EC Rep” changed to “XX Rep” (5.1.2).
• 6.1.2 d) 1) previously stated: “When using symbol 5.1.2 from ISO 15223-1:—, the ‘EC’ may be replaced by the 2-letter or 3-letter country code given in ISO 3166-1.”

 Added concept of “applicable policy”

• New 3.3 definition.
• Aligns with 1/2634/CDV of IEC 60050-880, 1^st ed, term 880-17-02) & about 20 additions in the normative text to “applicable policy” making those requirements based on what the authority having jurisdiction requires so more flexible.

Changed from “production control” to “production control identifier”

• Make clearer the definitions of lot number, lot code, batch code, batch number, serial number, & other options noted in 5.9 of ISO 20417, 1^st ed. (will be 5.8 ISO 20417, 2^nd ed.)

The requirements related to commercial product name were deleted as they were duplicative of the catalogue number requirements.

Deleted 4 b)

• The previous 4 b) roughly says: Normatively referenced edition of a standard in ISO 20417, ed., the manufacturer may substitute with a more current version provided by the manufacturer provided they can demonstrate the residual risk remains acceptable and is comparable to the residual risk that results from applying the normatively referenced document.
• The normative referenced standards in the new draft FDIS are undated or dated.  Undated references are required to be the most recent copy of the standard and the dated ones are required to be the dated version.  ISO 15223-1 is the only dated normative referenced standard and references ISO 15223-1:2021 and ISO 15223-1:2021/AMD 1:2025 (ISO format requirements) in the draft FDIS.

HAS Consultant comments received late, added to collated comments, and resolved. JTC3 will prepare updated Annex Zs for addition to the FDIS

updated the normative references

• Informative referenced standards (“should ” or “see standards” statement) were moved to the bibliography
• Dropped ISO 16142-1 & -2 standards as both were withdrawn

Delete former informative Annexes D, F, G and H;

• Annex D – Cross reference between the document and the requirements considered
• Annex F – Reference to the essential principles (ISO 16142-1:2016 & ISO 16142-2:2017 – both withdrawn)
• Annex G – Reference to the general safety and performance requirements for medical devices (Was previous corresponding list of GSPRs to the EU MDR list but will be replaced by Annex ZA^#)
• Annex H – Reference to the general safety and performance requirements for IVD medical devices (Was previous corresponding list of GSPRs to the EU IVDR list but will be replaced by Annex ZB^#)
• ^# Annex ZA & ZB The FDIS will include Annex ZA & ZB prepared by JTC3 but not the final ISO publication.

Need Help?

Need help with 60601 series standards including EMC? Eisner Safety Consultants can assist with strategic compliance planning for your medical electrical product lines, provide support when FDA or a regulator asks questions for a submission. We deal with EU, US, and other country regulatory requirements, standards, laws, directives, and guidances. Our team also provides support with Swiss MedDO, EU MDR, clinical evaluation assessment, NB remediation, STEDs, and more. We work with many test labs for medical safety, EMC and can arrange other testing, as well. Feel free to schedule a web meeting with Leo or contact us.

𝗕𝗥𝗘𝗔𝗞𝗜𝗡𝗚 𝗡𝗘𝗪𝗦 𝗜𝗠𝗗𝗥𝗙 𝗡𝟰𝟳 & 𝗡𝟱𝟮 recently updated to 𝗘𝗱𝗶𝘁𝗶𝗼𝗻 𝟮 – 𝗪𝗵𝗮𝘁’𝘀 𝘁𝗵𝗲 𝗿𝗲𝗹𝗮𝘁𝗶𝗼𝗻𝘀𝗵𝗶𝗽 𝘁𝗼 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭-𝟭, 𝟰𝘁𝗵 𝗲𝗱

IMDRF N47 & N52 both have been updated which will support Regulatory Submissions and Compliance Testing for the future of the IEC 60601 series including IEC 60601-1, 4^th edition. 𝗜𝗠𝗗𝗥𝗙 𝗽𝘂𝗯𝗹𝗶𝘀𝗵𝗲𝗱 two Final documents on 𝟮𝟲 𝗔𝗽𝗿𝗶𝗹 𝟮𝟬𝟮𝟰, both to Version 2:
N47 Essential Principles of Safety and Performance of Medical Devices & IVD Medical Devices, and
N52 Principles of Labeling for Medical Devices and IVD Medical Devices

The 𝗽𝘂𝗿𝗽𝗼𝘀𝗲 𝗼𝗳 𝗡𝟰𝟳 𝗴𝘂𝗶𝗱𝗮𝗻𝗰𝗲 is to provide harmonized Essential Principles that should be fulfilled in the design & manufacturing of medical devices and in vitro diagnostic (IVD) medical devices to ensure that they are safe and perform as intended.  The worldwide adoption of a common set of fundamental design and manufacturing requirements for medical devices that, when met, provide assurance the device is safe and performs as intended, offers significant benefits to, among others, manufacturers, users, patients/consumers, and to Regulatory Authorities.  Reducing differences between jurisdictions decreases the cost of gaining regulatory compliance and allows patients earlier access to new technologies and treatments.

While 𝗡𝟱𝟮 𝗹𝗲𝘃𝗲𝗿𝗮𝗴𝗲𝘀 𝗼𝗻 𝗡𝟰𝟳 𝗮𝘀 𝗶𝘁’𝘀 𝗽𝘂𝗿𝗽𝗼𝘀𝗲 states this guidance is to provide globally harmonized labeling principles for medical devices, including in vitro diagnostic (IVD) medical devices, and support N47.  Specifically, this document provides guidance on the content of the label, instructions for use, and information intended for the patient in order to support the safe and effective use of medical devices and IVD medical devices by their intended users.

With the 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭-𝟭, 𝟰𝘁𝗵 𝗲𝗱𝗶𝘁𝗶𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁 underway 𝗼𝗻𝗲 𝗼𝗳 𝘁𝗵𝗲 𝗗𝗲𝘀𝗶𝗴𝗻 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀 – 𝗚𝗼𝗮𝗹 𝟲 of the 𝗔𝗿𝗰𝗵𝗶𝘁𝗲𝗰𝘁𝘂𝗿𝗲 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻:

“Establish a policy relating requirements of the IEC 60601 series to the IMDRF essential principles and labelling principles.”
𝗚𝗼𝗮𝗹 𝟲 𝗶𝘀 𝗱𝗶𝗿𝗲𝗰𝘁𝗹𝘆 𝗿𝗲𝗹𝗮𝘁𝗲𝗱 𝘁𝗼 𝘁𝗵𝗲 𝗜𝗠𝗗𝗥𝗙 𝗱𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝘀 𝗡𝟰𝟳 𝗮𝗻𝗱 𝗡𝟱𝟮 𝘄𝗵𝗶𝗰𝗵 𝘄𝗲𝗿𝗲 𝗿𝗲𝗰𝗲𝗻𝘁𝗹𝘆 𝘂𝗽𝗱𝗮𝘁𝗲𝗱 𝘁𝗼 𝗘𝗱𝗶𝘁𝗶𝗼𝗻 𝟮.

The Architecture Spec states:

“It is the 𝗽𝗼𝗹𝗶𝗰𝘆 𝗼𝗳 𝗜𝗘𝗖/𝗧𝗖 𝟲𝟮 𝘁𝗼 𝗶𝗻𝗰𝗹𝘂𝗱𝗲 𝗮𝗻 𝗶𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝘃𝗲 𝗮𝗻𝗻𝗲𝘅 𝗺𝗮𝗽𝗽𝗶𝗻𝗴 the 𝗿𝗲𝗹𝗮𝘁𝗶𝗼𝗻𝘀𝗵𝗶𝗽 𝘁𝗼 𝘁𝗵𝗲 𝗜𝗠𝗗𝗥𝗙 𝗘𝗦𝗦𝗘𝗡𝗧𝗜𝗔𝗟 𝗣𝗥𝗜𝗡𝗖𝗜𝗣𝗟𝗘𝗦 𝗮𝗻𝗱 𝗟𝗔𝗕𝗘𝗟𝗟𝗜𝗡𝗚 𝗣𝗥𝗜𝗡𝗖𝗜𝗣𝗟𝗘𝗦 in 𝗲𝗮𝗰𝗵 𝗼𝗳 𝘁𝗵𝗲 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱𝘀 𝗼𝗳 𝘁𝗵𝗲 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭 𝗦𝗘𝗥𝗜𝗘𝗦.”
This is a goal of IEC/TC 62.  For the IEC 60601-1, 4^th edition project all Working Groups (WG’s) are tasked to do this work in their WG’s.  There are 12 WG’s split up by hazards. In the future all standards that are developed by IEC/TC 62 should also follow this goal.
Another part of Goal 6 from the Architecture Spec states:
“The 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀 𝗶𝗻 𝗺𝗮𝗻𝘆 𝗼𝗳 𝘁𝗵𝗲 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱𝘀 𝗶𝗻 𝘁𝗵𝗲 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭 𝗦𝗘𝗥𝗜𝗘𝗦 are 𝗶𝗻𝘁𝗲𝗻𝗱𝗲𝗱 𝘁𝗼 𝗳𝘂𝗹𝗳𝗶𝗹 𝘀𝗼𝗺𝗲 𝗼𝗳 𝘁𝗵𝗲 𝗽𝗿𝗶𝗻𝗰𝗶𝗽𝗹𝗲𝘀 set out 𝗶𝗻 𝘁𝗵𝗲 𝗜𝗠𝗗𝗥𝗙 𝗴𝘂𝗶𝗱𝗮𝗻𝗰𝗲 𝗱𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝘀. To facilitate the usage of the documents in the IEC 60601 SERIES for conformity assessment purposes by the AUTHORITIES HAVING JURISDICTION, it is important to 𝗰𝗹𝗲𝗮𝗿𝗹𝘆 𝗶𝗻𝗱𝗶𝗰𝗮𝘁𝗲 𝘄𝗵𝗶𝗰𝗵 𝗜𝗠𝗗𝗥𝗙 𝗽𝗿𝗶𝗻𝗰𝗶𝗽𝗹𝗲𝘀 𝗮𝗿𝗲 𝗰𝗼𝘃𝗲𝗿𝗲𝗱 𝗯𝘆 𝘄𝗵𝗶𝗰𝗵 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀 𝗶𝗻 𝗮 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱 𝗶𝗻 𝘁𝗵𝗲 𝗜𝗘𝗖 𝟲𝟬𝟲𝟬𝟭 𝗦𝗘𝗥𝗜𝗘𝗦.”
This 𝗚𝗼𝗮𝗹 𝟲 𝘀𝘂𝗽𝗽𝗼𝗿𝘁𝘀 𝘁𝗵𝗲 𝗜𝗠𝗗𝗥𝗙’𝘀 𝗰𝗼𝗻𝗰𝗲𝗽𝘁 𝗼𝗳 𝗲𝗹𝗶𝗺𝗶𝗻𝗮𝘁𝗶𝗻𝗴 𝗱𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝗰𝗲𝘀 𝗯𝗲𝘁𝘄𝗲𝗲𝗻 𝗷𝘂𝗿𝗶𝘀𝗱𝗶𝗰𝘁𝗶𝗼𝗻𝘀 which 𝗱𝗲𝗰𝗿𝗲𝗮𝘀𝗲𝘀 𝘁𝗵𝗲 𝗰𝗼𝘀𝘁 𝗼𝗳 𝗴𝗮𝗶𝗻𝗶𝗻𝗴 𝗿𝗲𝗴𝘂𝗹𝗮𝘁𝗼𝗿𝘆 𝗰𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝗰𝗲 from the various AUTHORITIES HAVING JURISDICTION (AHJ) and allows 𝗽𝗮𝘁𝗶𝗲𝗻𝘁𝘀 𝗲𝗮𝗿𝗹𝗶𝗲𝗿 𝗮𝗰𝗰𝗲𝘀𝘀 𝘁𝗼 𝗻𝗲𝘄 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝗶𝗲𝘀 𝗮𝗻𝗱 𝘁𝗿𝗲𝗮𝘁𝗺𝗲𝗻𝘁𝘀.  This is a positive impact on patients and also makes for an easier process for the manufacturers and for the AHJ’s, as well.

When IEC TC 62/SC 62A/WG 39 met in Arlington, VA on 1- 2 May 2024 this was brought up during the meeting, as this is an important issue that needs to be addressed during the IEC 60601-1, 4^th edition project. One aspect WG 39 is dealing with is “Information to be supplied by the manufacturer” (i.e. Labeling).  This is the IEC 60601-1, 4^th edition WG that I am a co-convener of. There are lots of changes happening in the standards and regulatory world around labeling and we are working hard to keep informed on all these changes that will impact this project. 𝗦𝘁𝗮𝘆 𝘁𝘂𝗻𝗲𝗱 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝘂𝗽𝗱𝗮𝘁𝗲𝘀

Need help with 60601 series standards (Medical Electrical Equipment) including EMC; training to 3rd or 4th edition; strategic planning for your medical electrical product lines; need support when FDA or a regulator asks questions for a submission Eisner Safety Consultants experts deal with EU, US, & other country regulatory requirements & standards, laws, directives, and more. Leo Eisner is an expert on standards development and sits on many standards committees. He also has experts on additional standards committees and we all talk to the regulators. He has a team of experts to support your needs.

We work with many test labs for Medical Electrical Safety & EMC and can arrange other testing, as well. Please let us know if we can help when you contact us.

Feel free to schedule a call with Leo or contact Leo at Leo@EisnerSafety.com or through our contact form.

CANADA

Health Canada has a Consultation: Proposed Changes to the Medical Devices Directorate’s List of Recognized Standards for Medical Devices. I’m surprised they are not updating any of the IEC 60601 based General and Collateral standards to the most recent updates of the summer of 2020 updates. Even the EMC standard IEC 60601-1-2 is still based on the 4.0 edition which is from 2014 and IEC 60601-1 the list references the 3.0 and 3.1 editions 2005 and 2012 respectively.

SAUDI ARABIA

Postponement announcement of the requirements timeline of medical devices unique device identification (Saudi -DI)

MDS-REQ 7 – Requirements for Unique Device Identification (UDI) for Medical Devices Version 4

EU
Questions And Answers On Certificates Of Free Sale And Article 60 Of Regulation (EU) 2017/745 On Medical Devices (MDR) – This document was developed by competent authorities, with the aim of providing guidance in the area of Certificates of Free Sale.
It considers how certificates of free sale should be processed/ generated for ‘old’, ‘legacy’ and MDR compliant devices. It highlights where certificates of free sale can be issued in the context of Article 60 (1) of the Regulation and where the use of national provisions may be required.
The document was endorsed by the CAMD during the 50th plenary meeting held in Paris in June 2022.

MDCG 2022-11 – MDCG Position Paper: Notice to manufacturers to ensure timely compliance with MDR requirements – Places FULL responsibility on manufacturers to complete the transition in time FULL STOP. Don’t expect any extension of the transition period beyond what has been established at this point.

US

Electromagnetic Compatibility (EMC) of Medical Devices: Final Guidance for Industry and Food and Drug Administration Staff – Issued June 6, 2022, replaces draft of November 17, 2020. NOTE transition period: This document will supersede “Information to Support a Claim of Electromagnetic Compatibility (EMC) of Electrically-Powered Medical Devices,” issued July 11, 2016, 1 year after the publication of this guidance for in vitro diagnostics and 60 days after the publication of this guidance for other device types (e.g. medical devices including home use devices and active implantables) within the scope of this guidance.

Webinar Recording (June 14, 2022) on Draft Guidance on Cybersecurity in Medical Devices: Quality System Considerations and Content of Premarket Submissions – The webinar focused on the following key subjects:

• Differences between 2018 and 2022 drafts
• General Principles of the guidance
• Design and documentation recommendations
• Transparency and labeling recommendations
• Answered questions

Need help with 60601 series standards (Medical Electrical Equipment) including EMC; strategic planning for your medical electrical product lines; need support when FDA or a regulator asks questions for a submission Eisner Safety Consultants experts deal with EU, US, & other country regulatory requirements & standards, laws, directives, and more. Leo Eisner is an expert on standards development and sits on many standards committees. He also has experts on additional standards committees and we all talk to the regulators. He has a team of experts to support your needs. Feel free to schedule a call with Leo or contact Leo at Leo@EisnerSafety.com or through our contact form.