What’s on the menu?

Where are we headed with 4th Ed.?
Structure changes;
Project timeline: and
Critical documents

Leo Eisner, the “IEC 60601 Guy”, of Eisner Safety Consultants will be your guide

What to do in the meantime?
Select applicable and normative standards for testing; and
How to set up a solid future-proof test plan

Ian Sealey of Vertexian will explain it

When, Where, How:

7 October 2024

Clayton Hotel Chiswick
Arrive 5:00 PM
Starts 5:30 PM
Ends 8:45 PM

Networking and meet for drinks afterwards

Register by either using our Contact form or send Leo a LinkedIn message via his profile.

If you would like to meet with Leo during the week of 7 Oct in London please contact him to schedule this rare opportunity.

Presenters Background:

Leo is the founder and principal compliance and regulatory consultant of Eisner Safety Consultants (ESC), ESC provides the medical device industry (from SME’s to Fortune 500’s) with product safety compliance & regulatory support focused on:

• design for compliance to IEC 60601 series of standards;
• design reviews against applicable requirements;
• identification of applicable standards, laws, regulations, directives and guidances;
• labeling reviews;
• support with test labs;
• training

Leo’s leadership and commitment in the standards development process runs deep and over many years including his involvement in numerous IEC, ISO, and AAMI working groups, committees, and maintenance teams over the last 20 years. 
His IEC 60601-1, 4^th edition involvement:

• Co-Convener of IEC/TC 62/SC 62A/WG39 – User interface aspects
• Advisory group member of IEC/TC 62/SC 62A/AG 50 – IEC 60601-1 Ed. 4.0 editing & leadership team
• Committee member IEC/SC 62A/WG37 – General requirements

To see a more detailed list go to Leo’s LinkedIn Profile.

Ian Sealey is the founder of Vertexian and is a medical device regulatory and quality consultant, with over 25 years’ experience. Vertexian provides the medtech industry with support in the following areas:

• electromedical devices;
• risk management;
• pre-compliance testing;
• training;
• UKCA marking; and
• manufacture of IEC test equipment

He was Assistant Secretary to the Board of the Department of Health (DH), a Medical Device Specialist at the Medicines and Healthcare products Regulatory Agency (MHRA), and a principal Medical Engineer in the National Health Service (NHS). He is a director of a health-related charity and a visiting university lecturer.

Need help with 60601 series standards including EMC; strategic compliance planning for your medical electrical product lines; need support when FDA or a regulator asks questions for a submission Eisner Safety Consultants experts deal with EU, US, & other country regulatory requirements & standards, laws, directives, and more. Eisner Safety Consultants team of experts also provides support with Swiss MedDO, EU MDR, clinical evaluation assessment, NB remediation, STEDs and more. He team includes experts on additional standards committees and we all talk to the regulators regularly. We’re here to support your needs.

We work with many test labs for Medical Safety & EMC and can arrange other testing, as well. Please let us know if we can help when you contact us.

Feel free to schedule a call with Leo or contact Leo at Leo@EisnerSafety.com or through our contact form.

Great News!!!! Effective 19 September 2023 FDA’s Accreditation Scheme for Conformity Assessment (ASCA) Program converted from a pilot program after 3 years to a permanent program, the agency announced. The transition is authorized under the Medical Device User Fee Amendments of 2022 (MDUFA V). The ASCA program’s goals are to:

• streamline the conformity assessment in medical device submissions,
• enhance the FDA’s confidence in test methods and results,
• decrease the need for additional information related to conformance with a standard,
• promote consistency, predictability, and efficiency in medical device review,
• serve as a least burdensome approach to conformity assessment

The ASCA program’s final guidance documents, issued in 2020, set the current framework for the program:

• Accreditation Scheme for Conformity Assessment (ASCA) Pilot Program – Final Guidance (Program Guidance)
• Basic Safety and Essential Performance of Medical Electrical Equipment, Medical Electrical Systems, and Laboratory Medical Equipment – Standards Specific Information for the ASCA Pilot Program – Final Guidance (Standards Specific Guidance)
• Biocompatibility Testing of Medical Devices – Standards Specific Information for the ASCA Pilot Program – Final Guidance (Standards Specific Guidance)

The FDA grants ASCA accreditation to test labs that meet the requirements of the program. The ASCA test labs are authorized to conduct testing and the output from the lab is a summary report that the manufacturer submits to the FDA (more to come). Once the FDA approves an ASCA test lab the FDA identifies the scope of recognized consensus standards that the lab is able to test too (they are able to expand that list over time & the FDA may suspend any and all of the scope of the lab, if appropriate), the name & address of the lab and the ASCA contact on the ASCA test lab list. If the lab is suspended there seems to be a note in the current scope, there is no separate search feature on the db for active and suspended labs. I just sent in a request to the standards and conformity assessment (S-CAP) group that is in charge of this db to ask if they can make this more user friendly.

FDA has added standards to the list of approved standards beyond what is noted in both Standards Specific Final Guidance documents and plans to continue to add recognized consensus standards to the list/db. You can search the list of recognized consensus standards db but make sure you click the check box next to “Included in ASCA?” to view the list of standards that are included in the ASCA program. When you get to the link for a specific standard make sure you review the standard and see if any limitations on the standard if a partial or full recognition and also if there are any limits from the ASCA program perspective so you know what to expect. Then you need to make sure the test lab you are planning to use has the applicable standards in scope, that apply to the product that you want to test for your submission to the FDA.

You’ve chosen a test lab and gotten a test quote including the ASCA costs. Now you need to get the testing done but please make sure before you submit to the FDA you don’t have any comments on the summary report from the ASCA lab that aren’t positive towards the approval. If there are any issues you want to resolve them before a final report is issued from the test lab to the manufacturer. The manufacturer provides the summary report as part of the premarket submission, not the test lab. You want a clean summary report going to the FDA, as the FDA relies on the ASCA’s test lab summary report instead of the full test report that has been submitted in the past.

Need help with 60601 series standards (Medical Electrical Equipment) including EMC; strategic planning for your medical electrical product lines; need support when FDA, the ASCA program or a regulator asks questions for a submission Eisner Safety Consultants experts deal with EU, US, & other country regulatory requirements & standards, laws, directives, and more. Leo Eisner is an expert on standards development and sits on many standards committees. He also has experts on additional standards committees and we all talk to the regulators. He has a team of experts to support your needs. Feel free to schedule a call with Leo or contact Leo at Leo@EisnerSafety.com or through our contact form.

We work with many test labs for Medical Electrical Safety & EMC and can arrange other testing, as well. Please let us know if we can help when you contact us.

On April 3, 2023 FDA added IEC 60601-1 Edition 3.2 2020-08 CONSOLIDATED VERSION Medical electrical equipment – Part 1: General requirements for basic safety and essential performance to their list of Recognized Consensus Standards as Recognition # 19-49 in Recognition List # 060. A reminder that Recognized Consensus standards are considered voluntary by the FDA for premarket submissions but they are what the majority of manufacturers use to facilitate & streamline the premarket process.

Relevant FDA Guidance and/or Supportive Publications*

US national differences:

1. (Recognition Number: 19-46) ANSI AAMI ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] Medical electrical equipment – Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD) [Including Amendment 2 (2021)]

2. Attachment Form No.: US_ND_IEC60601_1U ATTACHMENT TO TEST REPORT IEC 60601-1: US NATIONAL DIFFERENCES – Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
(https://documents.iecee.org/ords/f?p=702:558:::::P558_DOCUMENT_FILE_ID:2955038)

Note from Leo: This is a US National Difference Test Report Form issued by the CB Scheme for CB scheme reports.

You have 3 options
1 expires after December 17, 2023
The first 2 are acceptable now & going forward.

1) Use IEC 60601-1 Edition 3.2 (Recognition # 19-49) from now onward making sure to use References #1 AND #2.
Note: This first option is the best of the three. Test to the IEC standard as that way you can prepare your product for the US domestic and international markets at the same time. If you pass the testing you’ll meet most if not all requirements and then you can deal with the few US National Differences by applying the US National Differences which are also in item 2) of this list anyway. This is less restrictive for your product than if you test your product to the US version of the standard (ANSI AAMI – Item 2 of this list) and then try to go to the international market which most countries will require IEC testing anyway.

2) Use ANSI AAMI ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] (Recognition Number: 19-46) from now onward.
Note: This SIS is an older Recognized Consensus Standard but by inference, one would be wise to make sure that you also get the US National Difference Test Report mentioned above for the IEC 60601-1, ed. 3.2 which is based on the ANSI AAMI ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] (Recognition Number: 19-46)

3) During the transition period FDA will accept a declaration of conformity in support of premarket submissions to the older ANSI/AAMI ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012 (Consolidated Text) (Recognition Number: 19-4) but it will be superseded by recognition of ANSI/AAMI ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012 (Consolidated Text) [Including Amendment 2 (2021)] (Recognition Number: 19-46) after December 17, 2023.
Note: The SIS says that Recognition Number: 19-4 (ANSI/AAMI ES60601-1, edition 3.1) by Recognition Number: 19-46 (ANSI/AAMI ES60601-1, edition 3.2) but if you are smart I would switch to Recognition Number 19-49 (IEC 60601-1, edition 3.2). FDA should accept this Recognized Consensus standard for your premarket submission as long as your submission includes the US national differences References #1 & #2.

Need help with 60601 series standards (Medical Electrical Equipment) including EMC; strategic planning for your medical electrical product lines; need support when FDA or a regulator asks questions for a submission Eisner Safety Consultants experts deal with EU, US, & other country regulatory requirements & standards, laws, directives, and more. Leo Eisner is an expert on standards development and sits on many standards committees. He also has experts on additional standards committees and we all talk to the regulators. He has a team of experts to support your needs. Feel free to schedule a call with Leo or contact Leo at Leo@EisnerSafety.com or through our contact form.

We work with many test labs for Medical Electrical Safety & EMC and can arrange other testing, as well. Please let us know if we can help when you contact us.

The FDA in a little over a month on 30 May 2022 (that is swift) has updated the Recognized Consensus database for the AAMI 60601 Amendmended Standards that are referenced in my previous post of May 13, 2022. The AAMI standards were published in late March 2022.

Not each Recognition was updated in the same way. Let me explain:

FDA Recognition # 19-46 ANSI AAMI ES60601-1:2005/(R)2012 & A1:2012, C1:2009/(R)2012 & A2:2010/(R)2012 (Cons. Text) [Incl. AMD2:2021] – the ANSI AAMI ES60601-1 AMD2:2021 is identical to Amendment 2:2020 of IEC 60601-1:2005 (post corrected 13 June)

FDA Recognition # 19-47 ANSI AAMI HA60601-1-11:2015 [Including AMD1:2021] – the ANSI AAMI HA60601-1-11 AMD1:2021 is identical to AMD1:2020 of IEC 60601-1-11:2015 (post corrected 13 June)

FDA Recognition # 19-36 ANSI AAMI IEC 60601-1-2:2014 [Including AMD 1:2021] –  the ANSI AAMI IEC 60601-1-2:2014 Including AMD 1:2021 is identical to AMD1:2020 of IEC 60601-1-2:2014

FDA Recognition # 5-131 ANSI AAMI IEC 60601-1-8:2006 and A1:20012 [including AMD2:2021] – the ANSI AAMI IEC 60601-1-8:2006 and A1:20012 including AMD2:2021 is identical to Amendment 2:2020 of IEC 60601-1-8:2006

FDA Recognition # 19-39 ANSI AAMI IEC 60601-1-12:2016 [Including AMD 1:2021] –  the ANSI AAMI IEC 60601-1-12:2016 Including AMD 1:2021 is identical to AMD1:2020 of IEC 60601-1-12:2014

Need Help?

Need help with 60601 standards (Medical Electrical Equipment), work thru strategic planning for your medical electrical product lines, need support when FDA or a regulator asks questions for a submission Eisner Safety Consultants experts deal with EU, US, & other country regulatory requirements & standards, laws, directives, and more. Leo Eisner is an expert on standards development and sits on many standards committees. He also has experts on additional standards committees and we all talk to the regulators. Feel free to schedule a call with Leo or contact Leo at Leo@EisnerSafety.com or through our contact form.

So are you ready for all the changes of Amendment 2 of IEC 60601-1 and all the Amendments?

Join us for a live free webinar on an Insider’s look at IEC60601 Amendments: detailed guidance from a committee member responsible for changes – Aug 27, 10 AM PT/ 1 PM ET

With several hundred changes written into the 60601-1 Amendment alone, suffice it to say that the full scope of changes to the IEC60601 series is massive, creating a swell of confusion around understanding the updates & how to transition for compliance.

Greenlight Guru has teamed up with Leonard Eisner, the “IEC 60601 Guy”, of Eisner Safety Consultants to share his expertise on the topic, notably his contributions to The Amendments Project.

This in-depth webinar will cover clarifying details around the massive changes of the Amendments Project, provide guidance on updated standards already published, insider knowledge into updated standards not yet published & what to expect, & how to prepare accordingly for the impact it will have on your firm and product lines.

SOME OF THE CHANGES WE WILL COVER INCLUDE: 

• Updates to IEC 60601-1 (Medical Electrical Equipment)
• Updates to IEC 60601-1-2 (EMC)
• Updates to IEC 60601-1-8 (Alarms)
• Impacts of standard changes on:
  • Design
  • Regulatory approvals (i.e. FDA vs EU Notified Body – current vs new standards)
  • Safety certifications
  • Labeling / markings / packaging
  • Tests/ retesting
  • Essential Performance
  • Risk Management File
  • Usability Engineering File
  • Software Life Cycle Process
• Q&A session

WHO SHOULD ATTEND?

• R&D Engineers and Management
• Regulatory Affairs Professionals and Management
• Quality Professionals and Management
• Medical Device Executives
• Clinical Affairs Professionals and Management

Medical Electrical Standards are constantly being changed and evolving and the amount of changes seems to be accelerating. All too often I hear clients complain that they didn’t know about a standard until way too late in the process and have had to redesign their product to meet regulatory requirements.

So how do you stay up-to-date on all these changes? Are you considering the implication of these standards when putting together your regulatory strategy? Do you know what standards are coming down the line and how they may impact your product design? Are these standards harmonized in different markets? Does your test lab always know what versions of standards you need to test too?

If you have a medical electrical device or a software as a medical device and your answer to any one or more of these questions is NO then this free 90 minute webinar is for you.

Take Aways from this Webinar:

• What medical electrical and related standards are being updated now and how they interact with each other.
• What is the schedule for the IEC 60601 Amendment Projects and what other standards (i.e. ISO 14971, IEC 62366-1, IEC 62304) will impact the project?
• Overview of the recently released Wireless Coexistence Standards for US.
• Why you may need to redesign your product to meet the EMC Standard IEC 60601-1-2:2014 (4th Ed.).
• How does testing under the CB Scheme impact your testing and regulatory strategies?
• Resources to keep track of standards from both a regulatory and standards development perspective

WHO SHOULD ATTEND?

• Medical Device Executives
• QA/RA Professionals at all levels
• Compliance Engineers
• Quality Engineers
• Design Engineers
• Project Management Engineers
• Senior Staff involved in management reviews per ISO 13485 for the standards update section

If you want to learn more about the IEC 60601-1 certification process you can read an article on the greenlight.guru blog of a presentation I gave awhile back on this process.

ABOUT THE PRESENTER:

This webinar is being lead by me (Leo Eisner), “The 60601-1 Guy”, founder and principal consultant at Eisner Safety Consultants and moderated by Jon Speer of greenlight guru.

Leo is a licensed professional engineer in safety engineering, a certified Quality System lead auditor, an expert in product safety for medical electrical devices (IEC 60601 series of standards) and an expert in CE marking for the medical device EU Directives.

Eisner Safety Consultants has helped countless clients thru the Product Safety and Regulatory maze over the 20 year history of the company. Leo has 30 years experience in product safety. Leo ran the Compliance Engineering Group at Karl Storz and was a Senior Product Safety engineer at TÜV Product Service.

Leo Eisner, the “IEC 60601 Guy” & Principal Consultant, of Eisner Safety Consultants attended several IEC SC 62A Maintenance Team (MT 28 & MT 30) and Working Group (WG14) meetings from March 22 – March 31, 2017 in Oslo, Norway and London, United Kingdom to start the work of reviewing the items agreed on (in Frankfurt Oct 2016) for IEC 60601-1, 3rd ed. + Amendment 2 (or ed. 3.2) for development and comment.

A2 of IEC 60601-1 & its’ related collateral standards are anticipated to be published by the end of 2019.  In only 2+ short years from now!!!!  Will you be ready?  We are offering a web special til the end of March May 2017 on our Annual Standards Trends Reports.  See more below.

A2 changes & collaterals changes may include any of the following:

• safety gaps needing corrections,
• known problems for regulatory bodies,
•  inconsistencies within the standard,
• technical errors, and
• updates of standard references.

The above was the criteria for the ‘Short List’ vote on which items were agreed to in Frankfurt (Oct ’16) for A2 for IEC 60601-1 and it’s collateral standards.

Also, you need to be aware that the items that didn’t make it to the ‘short list’ are slated to be worked on for the 4th edition of IEC 60601-1 (the ‘long list’) which is scheduled to be published in 2024.  This will be a much more significant set of changes including potentially restructuring the standard and maybe even making the whole series a database standard.

Are you ready for changes coming for 60601-1, 3rd edition + Amendment 2 and 4th edition of IEC 60601-1?

We can help you stay up to date and ahead of the curve so you are prepared for these changes that are coming.  Check out our Annual Standards Trends Report as a fantastic resource that can save your company significant time and money (upwards of $100,000+).

To provide you an opportunity to receive the Eisner Safety Consultants Annual Standards Trends Reports for a significant discount of this year’s copy of these reports (publication between Late May to June 2017) we are offering a web special til the end of March May 2017 to give you the opportunity to learn from Leo about the Amendment 2 meetings in Oslo, Norway and London, U.K. The reports will include more details where these Amendment 2 changes are at and what these changes are.  If you want to stay ahead of your competitors, and save on the cost of standards committee membership fees, save on travel expenses, save time instead of sitting in these meetings, and getting the benefit of staying up to date on medical electrical equipment & systems (MEE&S) standards and home use MEE&S standard consider this amazing deal:

Eisner Safety Consultants

Annual Standards Trends Reports on MEE&S &

Home Use MEE&S Options

Get This Year’s Report(s): May/June 2017 Annual Standards Trends Report (ASTR) Options:

Normally priced at $1,997.00 Web Special $1,597.00 for the:

May/June 2017 Medical Electrical Equipment & Systems (MEE&S) ASTR OR

May/June 2017 Home Use MEE&S ASTR

Normally priced at $2,997.00 Web Special $2,497.00 for the:

Bundle pricing of both the May/June 2017 MEES & Home Use MEE&S ASTRs

Get This & Last Year’s Report(s): March 2016* & May/June 2017 ASTRs Options:

Normally priced at $2,397.00 Web Special $1,997.00 for the:

March 2016* & May/June 2017 Medical Electrical Equipment & Systems (MEE&S) ASTRs OR

March 2016* & May/June 2017 Home Use MEE&S ASTRs

Normally priced at $3,697.00 Web Special $2,997.00 for the:

Bundle pricing for all 4 Reports – March 2016* & May/June 2017 of both MEE&S & Home Use MEE&S ASTRs

* = MAR ‘16 ASTRs issued as of MAR ‘16 with no updates for these ridiculously low rates.

If you need help with IEC 60601-1 please email Leo Eisner at Leo at EisnerSafety dot com, or call Leo at +1 (503)-244-6151. He is the Principal Consultant of Eisner Safety Consultants and considered the ‘IEC 60601 Guy’ by many of his clients and associates.

Speed your time to market by following the step-by-step instructions that I will discuss in this free, 90 minute webinar, so you can obtain your product certification to IEC 60601-1 series of standards quicker.

I will walk you through the steps to success for product testing by a certification agency (like UL, TÜV, BSI, Intertek, etc.) to the IEC 60601-1 series of standards on medical electrical equipment and systems.
Learn from the expert the mistakes others have made that have slowed down their certification process (and how you can avoid them).
Take proactive steps so your product doesn’t need to get redesigned after testing starts.

Take Aways from this Webinar:

• The IEC 60601-1 standards series & if they apply to your product.
• What you need to know to classify your products to the IEC 60601-1 series.
• What is an isolation diagram and how does that help me with my design?
• Understanding the importance of the Risk Management File and Essential Performance requirements.
• Determine the applicable tests for your device.
• What are the marking and labeling requirements for the device?
• Know your critical components.
• What pre-tests to run and what’s not worth testing?
• What samples are needed for testing?
• Resources to help with this process and ways to reduce the paperwork off your backs.  Get your free sample of Our Annual Standards Trends Report. Learn more about our Annual Standards Trends Report service.

If you want to get a prelude to this webinar listen to the podcast that discusses some of the Take Aways of this presentation.

About the presenter:

This webinar is being lead by Leonard “The 60601-1 Guy” Eisner, founder and principal consultant at Eisner Safety Consultants.

Leo is a licensed professional engineer in safety engineering, a certified Quality System lead auditor, an expert in product safety for medical electrical devices (IEC 60601 series of standards) and an expert in CE marking for the medical device EU Directives.

Leo has helped countless clients thru the Product Safety and Regulatory maze over his career. He has 30 years experience in product safety. Leo ran the Compliance Engineering Group at Karl Storz Imaging and was a Senior Product Safety engineer at TÜV Product Service. Prior to that Leo worked in a cross section of groups at U.L. for 9 years.

About greenlight.guru

greenlight.guru is the only Quality Management Software built exclusively for the unique needs of medical device companies, allowing you to bring safer devices to market faster while reducing risk and ensuring compliance. Visit their home page to learn more.

About Eisner Safety Consultants

Eisner Safety Consultants provides affordable, on-time product approvals via safety & regulatory agencies to medical device companies. We provide assistance with U.S., Canadian, European, & other international regulations. Click here to learn more about our services we offer.

Near the end of writing this article I had an unfortunate incident that I personally had to use a home use medical devices for 3 weeks of IV antibiotics (syringe pump – like an infusion pump but with a syringe instead of an IV bag) after a knee joint infection that I had to have emergent surgery & stay in the hospital for 2 days in Early June 2016.  I was out of work for about a month and so I got a close birds eye view of why the medical device and wellness device markets are exploding.  This explosion of interest comes from several factors including the “Super aging” of societies around the globe, Internet of Things (IoT), the portability of devices, the growth of wearable technologies and other factors discussed in the article.

There is a huge need to support those at home that are sick, injured, has an acute issue or chronic illness that want a comfortable life and would rather stay at home then be in a sterile hospital or other clinical setting any longer than they have too.  I know I was ready to get home after 2 days in the hospital, even though I had to rest at home, I was much more comfortable at home than in the hospital setting.  So, now I can appreciate how important it is to have these medical and wellness devices evaluated for the proper environment and proper standard(s) and to meet national regulations.   One of the issues that is important to this conversation is the blurry line between home use medical devices and wellness devices.  FDA has written guidances for both Home Use Medical Devices and Wellness Devices to clarify from their perspective.  There, also is a newer IEC System Committee called Active Assistive Living (SyC AAL) that is looking at the gaps in standards and other IEC technical documents for home use medical devices and non-medical devices (Some being wellness devices).  The article goes into detail on this SyC AAL and also looks at the medical electrical device standards focused around Home Use Medical Electrical Devices.

Enjoy the article and if you have interest in or need help with the IEC 60601-1 series, home use medical electrical devices or the SyC AAL please email Leo Eisner at Leo at EisnerSafety dot com, or call Leo at +1 (503)-244-6151. Leo is the Principal Consultant of Eisner Safety Consultants.

A reminder that FDA Guidances and Recognized Consensus Standards are voluntary.  But I remind my clients’ that if you don’t use these voluntary documents for premarket submissions you make your life and the reviewer’s life a lot harder, typically.  So, I recommend, in most cases, to use these voluntary documents to speed up the process, in the long run.  In the short run, you may need to do more testing but if you don’t you risk the chance of your product not being accepted by the FDA.

The Guidance goes on to say that “the review of EMC information in a submission is based on the risk associated with EMC malfunction or degradation of the device under review, as well as the use of appropriate FDA-recognized standards or appropriate consensus standards.”  The Guidance indicates that manufacturers typically reference in premarket submissions Recognized consesnsus national (US) and international standards such as IEC 60601-1-2²) (3rd or 4th edition) Medical Electrical Equipment EMC standard, device specific Particular Standards such as IEC 60601-2-XX, and lastly they reference other consensus standards for electrically-powered deevices that include information on EMC such as ISO 14708³ for active implantable medical devices.

The Guidance continues with a listing of details that FDA is expecting manufacturer’s provide in their premarket submissions, so the medical device EMC information is clear and consistent information for the submission, and are consistent with the specifications included in the standards, as referenced above, that are applied to the premarket submission.  The Guidance points to the FDA Recognized Consensus Standards database located at http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfStandards/search.cfm.

The rest of the Guidance, Section II “EMC Information”, details the list of items the FDA is expecting of the manufacturer’s for premarket submissions.  And of course the FDA leaves an opening for a broad statement at the end of the section that says: “Additional information not outlined above may be requested by FDA depending on intended use and intended use environment for specific active medical devices (e.g. implantable portions of active devices) to demonstrate the device’s claims regarding electromagnetic compatibility (EMC).”

If you need help with this FDA Draft Guidance or with IEC 60601-1-2 edition 3 or edition 4 or you are interested in our new Eisner Safety Consultants Standards Reconnaissance Database please email Leo Eisner directly at Leo@EisnerSafety.com, or call Leo at +1 (503)-244-6151. He is the Principal Consultant of Eisner Safety Consultants (bit.ly/EisnerSafetyConsultants).

^{Footnotes cited from FDA Draft Guidance Document issued on 2 Nov 2015 titled: “Information to Support a Claim of Electromagnetic Compatibility (EMC) of Electrically-Powered Medical Devices”}

<sup>1. According to International definitions, “disturbance” is the cause and “interference” is the effect. In the US, “interference” is often used interchangeably for both cause and effect though more often for the cause. 
2. IEC 60601-1-2: 2007 [3rd Ed.]:Medical Electrical Equipment – Part 1-2: General Requirements for Safety – Collateral Standard: Electromagnetic Compatibility – Requirements and Tests, IEC 60601-1-2:2014 [4th Ed.], Medical Electrical Equipment, Part 1 2: General Requirements for Basic Safety and Essential Performance – Collateral Standard: Electromagnetic Disturbances – Requirements and Tests, AAMI/ANSI/IEC 60601-1-2: 2007 [3rd Ed.]:Medical Electrical Equipment – Part 1-2: General Requirements for Safety – Collateral Standard: Electromagnetic Compatibility – Requirements and Tests, and AAMI/ANSI/IEC 60601-1-2: 2014 [4th Ed.]:Medical Electrical Equipment – Part 1-2: General Requirements for Safety – Collateral Standard: Electromagnetic Disturbances – Requirements and Tests 
3. ISO 14708-3 Implants for surgery — Active implantable medical devices — Part 3: Implantable neurostimulators</sup>